How to modify 2Ch8way project to 4Ch8Way?

Post Reply
shengwenLiang
Posts: 46
Joined: Thu Jul 06, 2017 12:57 pm

How to modify 2Ch8way project to 4Ch8Way?

Post by shengwenLiang » Thu May 17, 2018 1:02 am

Hi,
Recently, I want to modify the 2Ch8Way project to 4Ch8Way, and I find in 2Ch8Way1.0.2 project that does not exist the channel2 and channel3 constraints and only have channel0 and channel1. so I get CH2
and CH3 constraints file from 2Ch8Way1.0.0 project. and I also find in Channel2 and channel3 constrains file. The clocking Wizard has the different name, which means i should modify the block design: insert two clocking wizards into block design, named CH1MMCMC1H200 and CH2MMCMC1H200. Then connect CH1 to V2NF100DDR_1, CH2 to V2NF100DDR_2?
Thanks.

KibinPark
Posts: 47
Joined: Thu Mar 30, 2017 9:25 am

Re: How to modify 2Ch8way project to 4Ch8Way?

Post by KibinPark » Thu May 17, 2018 1:38 am

Ch 0 and 1 share a CH0MMCM1H200, and both ch 2 and 3 have their dedicated MMCM.
Add two clocking wizards named CH2MMCMC1H200 and CH3MMCM1H200.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest